Scrappee STAGG Party - Micro Staggerwing Duo
Shipping from the 26th April
Based on the staggered biplane wing layout of the Beechcraft Model 17, the Scrappee STAGG is an easy to build, stable flying model kit, with a performance suitable for light wind days or indoor flying in most sports halls.
With the lower wing position forward of the top wing, the model provides a very different flying experience than the standard Scrappee Trainer and Scrappee Biplane kits. It also looks amazing in the air.
The STAGG Party Duo includes the USAAC and Speedbird livery so you can choose the best STAGG for the job, or share the experience with a friend and save a few £££ too.
NOTE: To get your Scrappee STAGGs in the air you will need an RC transmitter (compatible with one of the 3 types of receiver available) plus suitable batteries and charger. Please feel free to CONTACT US if you need some guidance!
The kits are available as Kit Only - which provides you with the complete airframe, OR you can select (from the drop down menu at the top of this page) Kit + Flight Pack, which includes the All In One (AIO) receiver with on board control servos, plus motor/gearbox and prop & adapter to complete the models.
The Scrappee STAGG kits come with a step by step printed Assembly Guide illustrating every detail of the build to ensure you succeed in producing a great looking and flying model.
Click on the booklet to download!
Microaces Scrappee STAGG
|Controls||Rudder, Elevator, Throttle|
|Length||330mm / 13"|
|Wingspan||427mm / 16.8"|
|Wing Area||5.60 sq dm / 86.8 sq in.|
|Flying Weight.||44 - 48g/1.5 - 1.7oz|
|Wing Load||~8.2 g/sq.dm / 2.69 oz/sq.ft.|
Parkzone PKZ3351, PKZ3352 or
|Rec. Motor / G.Box||
OR Parkzone PKZ3624
1 Cell Lipo. 130-180mAh 1S 25C with
E-Flite EFLB1501S45 works well!
|Rec. Prop||GWS 4530|
|Skill Level - Build||Beginner|
|Skill Level - Pilot||Beginner|
|Rec. Adhesive||UHU por|
Kit Content (per kit)
|SHEET PARTS||2mm laser cut Depron Airframe sheet|
|1mm printed & laser cut Depron fuselage sheet|
|1mm printed & laser cut Depron flight surfaces sheet x 2|
|200 micron printed & laser cut polypropylene sheet|
|polyester sticker sheet|
|LOOSE PARTS||0.8mm laser cut plywood motor mount|
|Two 30mm Ø Sponge rubber tires + 3D printed hub assembly|
|Four 3mm & two 4mm Ø noedymium magnets|
|2mm Ø carbon fibre rod axle|
|pre-shaped piano wire elevator & rudder control rods|
|Self adhesive ballast strip|