Microaces Aero Fokker D.VII 'Li' Kit
Flown by Rudolf Stark 1918
The first in a brand new line of micro-kits from Microaces. The Fokker is designed from the ground up and is possibly the most detailed and realistic microscale aircraft of its type. The airframe is designed to take most ultra micro RC equipment found in similar sized RTF aircraft. Double sided printing directly onto foam ensures a light, low wing load aircraft with lots of character and predictable flight characteristics.
History in the Making
Our love of aviation history ensures that the aircraft we choose to reproduce as kits not only look fantastic on static display and in the air, but they also carry a depth of history that can be explored. Although introduced in the later stages of WWI, the Fokker D.VII was a seriously formidable combat aircraft. Designed through the lessons of its predecessors it was comparitively stable, fast and maneuverable and was quickly liked by the pilots who flew it.
Electronics Packs for the Fokker D.VII
If you need the required electronics for radio controlled flight, the full range of Flight Packs available can be viewed HERE
Specification
Aero Fokker D.VII Model
| Airframe | Scale |
| Controls | Rudder, Elevator, Throttle |
| Length | 295mm / 11.5" |
| Wingspan | 368mm / 14.5" |
| Wing Area | 3.95 sq dm / 61 sq in. |
| Flying Weight. | 35 - 39g/1.2 - 1.4oz |
| Wing Load | ~9.0 g/sq.dm / 3.0 oz/sq.ft. |
| Recommended Receiver |
Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410 (N.B. Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron) |
| Rec. Motor / G.Box | Parkzone PKZ3624 (P-51 Motor/Gearbox) |
| Rec. Prop | GWS 4040, GWS 4530 |
| Skill Level - Build | Intermediate |
| Skill Level - Pilot | Intermediate |
| Tools required | Scalpel, 180 Grit sandpaper or stick, straight edge, tweezers |
| Rec. Adhesive | UHU por / Foam safe CA / Aliphatic glue |
Kit Content
| SHEET PARTS | 2mm laser cut Depron Airframe sheet |
| 1mm printed & laser cut Depron fuselage sheet | |
| 1mm printed & laser cut Depron flight surfaces sheet | |
| 200 micron printed & laser cut polypropylene sheet | |
| polyester sticker sheet | |
| LOOSE PARTS | 0.8mm laser cut plywood motor mount |
| Two 30mm Ø neoprene rubber tires | |
| Six 3mm Ø noedymium magnets | |
| 100mm x 6mm Ø plastic tube | |
| 1mm x 0.4mm carbon fibre strip | |
| 1mm Ø carbon fibre rod | |
| pre-shaped piano wire elevator & rudder control rods |
Video
Assembly Guide
Click on booklet to view online!
