Scrappee NiteOwl Kit - With LED Lights!
If you're looking to extend your flying time well into the evening and beyond, the Scrappee NiteOwl is a high fun factor, easy flying, low cost way to enjoy illuminating micro RC in the dark.
Based on the Scrappee Patriot II airframe, with a destinctive night time colour scheme and the NEW Microaces LED Lighting Kit included, the NiteOwl is a whole lot of fun when the rest of the fleet is grounded due to fading light.
- An easy, quick build kit that's also tough AND repairable.
- A plug and play, easy install LED system compatible with AIO receivers.
- An ideal platform for experiencing micro RC in the dark.
- A great way to extend flying times into the evening
This is a kit that's not only for the beginner, but also for anyone with a sense of fun and adventure who wants to enjoy all aspects of model RC flying.
NOTE: To get your Scrappee in the air you will need an RC transmitter (compatible with one of the 4 types of receiver available) plus a suitable battery and charger. Please feel free to CONTACT US if you need some guidance!
Selecting the right receiver to complete your kit:
The Microaces AIO 5CH micro receiver is available with the following protocols. If unsure, check your transmitter instruction manual to find out which protocol(s) it uses. Then select the compatible receiver protocol below to view the appropriate receiver to add to your order.
|FrSky D8 Compat.
|FrSky D16 Compat.
Floats with that?
Microaces has created a Tyvek Float kit for all Scrappee aircraft. It is designed to be interchangeable with the supplied wheelset so you can have the best of both worlds.
Click on the image below to find out more...
Scrappee kits come with a step by step printed Assembly Guide illustrating every detail of the build to ensure you succeed in producing a great looking and flying model.
Click on the booklet to download!
Microaces Scrappee NiteOwl
|Rudder, Elevator, Throttle
|330mm / 13"
|430mm / 17.0"
|3.68 sq dm / 57 sq in.
|39 - 42g/1.4 - 1.5oz
|~10.8 g/sq.dm / 3.5 oz/sq.ft.
|Rec. Motor / G.Box*
Microaces Motor Gearbox with STANDARD prop shaft
|Skill Level - Build
|Skill Level - Pilot
|Deluxe Materials Foam2Foam
*Now included in the kit
|Brushed Motor/Gearbox with standard prop shaft
|GWS 4530 Prop and rubber prop adapter
|Microaces LED Lighting Kit A
|2mm laser cut Depron Airframe sheet
|1mm printed & laser cut Depron fuselage sheet
|1mm printed & laser cut Depron flight surfaces sheet x 2
|200 micron printed & laser cut polypropylene sheet
|polyester sticker sheet
|0.8mm laser cut plywood motor mount
|Two 30mm Ø Sponge rubber tires + 3D printed hub assembly
|Four 3mm & two 4mm Ø noedymium magnets
|2mm Ø carbon fibre rod axle
|pre-shaped piano wire elevator & rudder control rods